Welcome to Changzhou DingHao Precision Machine Co., Ltd. Email: firstname.lastname@example.org
1.MI Series Cam Clutch is used for indexing applications.
2.Highly accurate indexing transmission type.
3.Best suited for low-speed indexing and the short transmission distance transmission case
1）The key should be in accordance with JIS B1301-1959.
Installation and Usage
1、Sprag type freewheel WMZ is the same construction as MZ, it shielded b shield beaings on both ends, packed with a special grease, and ready for use. No additional lubricant is required.
2、For attaching pulleys, gears or sprockets to the clutches, insert hubs along the inner surface of the outer race and screw the bolts (high tension) into the tapped
holes on the clutch end.
3、Recommended shaft tolerances are shown in the table on the lower left.
4、External thrust load should be supported by other devices, not by the Cam Clutch.
5、Use only a parallel key to secure the clutch to the shaft. Do not use a tapered key.
6、For vertical mounting, please consult Ding Hao Precision machine.
7、Ambient temperature range is -5℃ to +40℃.
8、Key to be used should be in accordance with ISO R773.
9.Use 2 # lithium grease 30% + Engine oil 70% , Stirring evenly. The grease required temperature range -40 ℃ ～ + 150 ℃. Plus grease once for every month.
Copyright © 2005-2017 Changzhou Dinghao Precision Machine Co., Ltd.